| The Standard Capacity cartridge has a single toner hopper, this will take around 130g max of toner. The High Capacity cartridge has two toner hoppers, one hopper in the same location as the standard cartridge (again this will take around 130g max of toner) and a second hopper to the left of the first when looking at the cartridge face on to the OEM fill hole. This second hopper will take around 90g max of toner. You can convert a High Capacity cartridge to a Standard Capacity by refilling with 120g of our toner and using a Standard Capacity chip. You cannot convert a Standard capacity cartridge to a High Capacity, it just won't take the quantity of toner needed. When using our toner DO NOT touch the OEM developer. here are no mixing problems with our toner on top of OEM toner. Due to the limitation of the size of the toner hoppers we suggest emptying any residual OEM toner from the cartridge. This is purely to ensure the full refill will fit without overflow, and not mandatory. If you do empty out the residual OEM toner, just gentle shaking of the cartridge and no additional cleaning is needed. DO NOT blow inside the cartridge with an air gun. To recharge a Standard Capacity cartridge simply refill the single toner hopper. To refill a High Capacity cartridge refill both toner hoppers, the larger with approx 120g of toner an the smaller with approx 60g. |
